Flow Solutions
MECHANICAL
1761 Universal Slip Coupler
PLASSON'S innovative solution for connecting or repairing multiple pipe types with one fitting.
14-18 mm 0.55”-0.71”
19-22 mm 0.74”-0.86”
24-28 mm 0.94”-1.1”
31-35 mm 1.22”-1.37”
40-43 mm 1.57”-1.69”
48-51 mm 1.89”-2.00”
60-64 mm 2.36”-2.52”
KEY FEATURES Suits a variety of plastic and metal pipe materials. Each fitting designed to fit a wide range of diameters. Zero force pipe insertion – slides freely back and forth. Large section ‘o’-ring seal – compensates for poor pipe quality. Seal compression increases as pressure increases. Robust PP body and nut – high impact strength and stress resistance. Long sealing area – bridge over damaged section or gap between pipes.
Total reliability – PN16, designed to last 50 years. Suitable for all cold water applications up to 40°.
Tel 01444 244446
sales@plasson.co.uk
www.plasson.co.uk
1761 Universal Slip Coupler Innovative solution for water supply pipes 1761
H
5
1
2 3
4
I
1. Body: PPH. 2. Safety seal: NBR. 3. ‘O’ ring: NBR.
4. Grip Ring: Acetal & stainless steel. 5. Nut: PPH.
Maximum repair length gap (Mrl)
1761 Universal Slip Coupler Universal x Universal
d (popular pipes)
Mrl (Maximum repair length)
Code
H
I
E
PL176100014018 PL176100019022 PL176100024028 PL176100031035 PL176100040043 PL176100048051 PL176100060064
14-18 (15mm, 3/8”) 19-22 (20mm, 1/2”) 24-28 (25mm, 3/4”)
80 80 90
180 180 200 210 250 270 310
119 119 133 143 151 158 176
54 58 66 76 89
31-35 (32mm, 1”)
100 110 120 130
40-43 (40mm, 11/4”) 48-51 (50mm, 11/2”)
101 120
60-64 (63mm, 2”)
Fitting Instructions
Mrl
1
2
Mark pipe insertion depth. (approximately half the fitting length). Undo nuts 1 to 2 turns while ensuring they remain on the fitting.
Insert each pipe to the marking.
3
Note
Tighten each nut firmly with a Plasson wrench while holding the body with another wrench. The threads should no longer be visible.
If using to repair a damaged pipe, please note the maximum repair length. If the damaged section is longer than the Mrl, use two fittings as shown.
Note: If the fitting is reused, make sure metal teeth are present in the split ring.
Plasson UK Ltd. Plasson House, 27 Albert Drive, Burgess Hill, West Sussex. RH15 9TN Tel: 01444 244446 sales@plasson.co.uk www.plasson.co.uk Tel 01444 244446 sales@plasson.co.uk
www.plasson.co.uk
Page 1 Page 2Powered by FlippingBook