UK
Specialist EF Saddles
PLASSON saddles are uniquely designed to allow cost effective connections and branches from large diameter PE pipework. Simple and easy to install with confidence and suitable for a large range of SDR Pipes, (please check website for suitability at each size) manufactured to BS EN12201 and EN1555 makes them the perfect solution for both water and gas applications. Simple Clamping Systems Our unique clamping systems have been engineered to ensure PLASSON saddles are quick and easy to use.
Our OneBolt system for saddles to suit pipes up to 315mm remove the need for any specialist equipment. Our LD and XL saddles use a unique and simple clamping system. Simply pick the correct saddle plate and attach this to the tension straps around the pipework. Tighten until the indicators touch, signals that the saddle is secured and ready for electrofusion. Embedded heating wires ensure large weld zone All PLASSON saddles are designed with large weld zones to give confidence to the installer. The embedded wires overlap the cut out area to ensure the maximum surface weld area is created. Built-in test point Each saddle has an injection moulded test point built into the body of the outlet. The test point provides a quick and simple way to test weld integrity of the saddle prior to drilling. The connection to a standard pressure test pump is by 16mm push- fit fitting. Ensure 3x cooling period prior to testing and drilling. Maximum Bore The full bore of the saddle is opened by using the PLASSON core drill. All saddles can be welded in place on pressurised (live) or de- pressurised mains (dead).
Quality & Approvals Pressure rated PN16 (water), PE100 SDR11 (gas). PLASSON EF fittings are suitable for pipelines SDR7.4 to SDR41. (Please check individual fitting for suitability) PLASSON Electrofusion fittings are certified to EN 1555 and EN 12201, and meet with Water Supply (Water Fittings) Regulations 1999, section 4.
www.plasson.co.uk
45
Powered by FlippingBook