Flow Solutions
VALVES
3703 Mains stop valve
Full bore 1/4 turn ball valve for mains isolation.
Manufactured from glass reinforced polyamide, the 3703 now provides an alternative solution to the traditionally used gunmetal and dzr stop valves. The 3703 is a UK Water Reg4 approved stop valve for 11/2”/50mm and 2”/63mm mains pipe manufactured from non metallic materials. The 3/4” (DN20) - 2” (DN50) range give a full bore alternative to the standard stop tap. Approved to BS8588:2017 the 3703 is the new standard for use on barrier pipes in contaminated ground, at all sizes. A version is available which has drain/test ports on one end of the valve (for above ground use only).
KEY FEATURES Non metallic primary stop valve, rated PN16. Full bore (ultra-low headloss). Quarter turn operation.
Double ‘O’ ring sealed spindle for reliability. Options for drain/test port (above ground use). BS8588:2017 approved (contaminated ground). GRP polyamide - corrosion resistant for long service life. Lead free.
Tel 01444 244446
sales@plasson.co.uk
www.plasson.co.uk
3703
n for two drain ports or no drain ports. of potable water systems and monitoring system pressure, t connections to hoses without tampering with the system line.
3703 Mains stop valve Manually operated shut off valve, 3/4” DN20 - 2” DN50. Above and below ground use valve. 3/4”-11/4” block type handle. 11/2 “ and 2” universal stop tap key handle. Drain option, above ground use only. Drain port ISO7/1 BSP thread. Service valve for sampling or drainage
Plasson's Ball Valve is easy to use, tamper proof as well
Plasson's Ball Valve is produced entirely of plastic, eliminating the risk of corrosive damage to the system. Plasson's Ball Valve is produced entirely of plastic, eliminating the risk of corrosive damage to the system. Plasson's Ball Valve features an option for two drain ports or no drain ports. Ideally suited for draining or sampling of potable water systems and monitoring system pressure, Plasson's valves allow simple and direct connections to hoses without tampering with the system line. Plasson's Ball Valve features an option for two drain ports or no drain ports. Ideally suited for draining or sampling of potable water systems and monitoring system pressure, Plasson's valves allow simple and direct connections to hoses without tampering with the system line. Removable tamper resistant handle
gauge
‘O’ ring sealed spindle for reliability.
toring sure in em
Easily identifiable drain port option: • Blue dot - no drain port • Black plug- optional drain port
3/4”-11/4” block type handle. 11/2 “ and 2” lever handle.
Pressure gauge for monitoring the pressure in the system Pressure gauge for monitoring the pressure in the system
Service valve for sampling or drainage Full bore (ultra-low headloss). Service valve for sampling or drainage
mper proof as well as safe and reliable
Double seal on spindle to prevent leakage
Plasson's Ball Valve is produced entirely of plastic, eliminating the risk of corrosive damage to the system.
Locked and sealed body parts ensure system integrity
Locked and sealed body parts ensure system integrity Operating pressure: Plasson's Ball Valve is rated PN16/231 PSI Service valve for sampling or drainage Locked and sealed body parts ensure system integrity Plasson's Ball Valve is produced entirely of plastic, eliminating the risk of corrosive damage to the system. Two drain port option Pressure gauge for monitoring the pressure in the system Removable tamper resistant handle Removable tamper resistant handle Easily identifiable drain port option: • Blue dot - no drain port • Black plug- optional drain port Plasson's Ball Valve features an option for two drain ports or no drain ports. Ideally suited for draining or sampling of potable water systems and monitoring system pressure, Plasson's valves allow simple and direct connections to hoses without tampering with the system line. AS 4020, NSF 61 for use with potable water. The threads are Rc according to ISO 7-1 or NPT. Easily identifiable drain port option: • Blue dot - no drain port • Black plug- optional drain port Plasson's Ball Valve is easy to use, tamper proof as well as safe and reliable Plasson's Ball Valve features an option for two drain ports or no drain ports. Ideally suited for draining or sampling of potable water systems and monitoring system pressure, Plasson's valves allow simple and direct connections to hoses without tampering with the system line. Plasson's Ball Valve is easy to use, tamper proof as well as safe and reliable Standards: Plasson's Ball Valve is tested according to AS 5830, and to
n port option: port drain port
seal dle to
leakage
Plasson's Ball Valve is easy to use, tamper proof as well as safe and reliable
Double seal on spindle to prevent leakage Pressure gauge for monitoring the pressure in the system Double seal on spindle to prevent leakage
Two drain port option Two drain port option Service valve for sampling or drainage
PLASSON Ltd. Maagan Michael D.N. Menashe 3780500 Isra E-mail: sales@plasson.com, www.plasson.com
PSI
Removable tamper resistant handle
Locked and sealed body parts ensure system integrity
to AS 5830, and to the standards water. 1 or NPT.
Easily identifiable drain port option: • Blue dot - no drain port • Black plug- optional drain port
Plasson's Ball Valve is easy to use, tamper proof as well as safe and reliable
Technical Details: Application:
Operating pressure: Plasson's Ball Valve is rated PN16/231 PSI Operating pressure: Plasson's Ball Valve is rated PN16/231 PSI
Mains Stop Valve for Above & Below Ground Use
Body & Spindle:
Glass reinforced polyamide
Ball:
Glass reinforced polypropylene
Standards: Plasson's Ball Valve is tested according to AS 5830, and to the standards Removable tamper resistant handle Standards: Plasson's Ball Valve is tested according to AS 5830, and to the standards Double seal on spindle to prevent leakage
Locked and sealed body parts ensure system integrity Two drain port option
nashe 3780500 Israel, Tel: +972.4.6394711, Fax: +972.4.6390887 com Ball Seat: Handle:
Polymeric
Polypropylene
AS 4020, NSF 61 for use with potable water. The threads are Rc according to ISO 7-1 or NPT. AS 4020, NSF 61 for use with potable water. The threads are Rc according to ISO 7-1 or NPT. 2” valves available with locking plate. Seals: Threads:
EPDM
BSP
Pressure rating:
Water PN 16
Easily identifiable drain port option: • Blue dot - no drain port • Black plug- optional drain port
Tel 01444 244446
sales@plasson.co.uk
www.plasson.co.uk
PLASSON Ltd. Maagan Michael D.N. Menashe 3780500 Israel, Tel: +972.4.6394711, Fax: +972.4.6390887 E-mail: sales@plasson.com, www.plasson.com PLASSON Ltd. Maagan Michael D.N. Menashe 3780500 Israel, Tel: +972.4.6394711, Fax: +972.4.6390887
3703
3703 Mains stop valve
Without drain For Above and Below Ground Use 3/4”, 1” & 11/4” Standard handle
11/2” & 2” Universal Valve key
50mm & 63mm Universal Valve key
Code (no) Drain Above & Below Ground PV0370300007 PV0370300010
size
DN x Rc
A1
A2
H
I
B
E
W Box Qty
3/4”
20 x ¾”
27 33 36 45 53
54 64 70 87 97
97
17 21 20 24 29
36 46 55 65 75
53 64 73 91
175 313 393 712 918
72 72 48 30 24
1”
25 x 1”
116 118 144 162
PV0370300013
11/4” 11/2”
32 x 1¼” 40 x 1½”
PV037030U0015 PV037030U0020 PV0370300050 PV0370300063
2”
50 x 2”
100
50mm 63mm
(1 1/2” valve, with 7020 50mm x 1 1/2” Male Adaptor)
(2” valve, with 7020 63mm x 2” Male Adaptor)
With drain for Above Ground use only
3/4”, 1” & 11/4” Standard handle
11/2” & 2” Lever handle
Code With Drain Above Ground only
size
DN x Rc
Rp*
A1
A2
H
I
B
E
W Box Qty
PV037030F007 3/4”
20 x ¾”
¹/8” ¹/8”
27 33 36 45 53
54 64 70 87 97
97
17 21 20 24 29
36 46 55 65 75
53 64 73 91
175 313 393 712 918
72 72 48 30 24
PV037030F010
1”
25 x 1”
116 118 144 162
PV037030F013 11/4” PV037030F015 11/2”
32 x 1¼” 40 x 1½”
¼” ¼” ¼”
PV037030F020
2”
50 x 2”
100
* Drain ports ISO 7/1 Rp, BSP thread.
Tel 01444 244446
sales@plasson.co.uk
www.plasson.co.uk
Page 1 Page 2 Page 3Powered by FlippingBook