Technical Specifications for Plasson ElectroFusion Fittings
Fittings material All Plasson ElectroFusion fittings are produced from material class PE100 which conform to international standards for potable water and natural or suitable manufactured gas systems. Production from PE80, available upon request.
Pressure rating All Plasson ElectroFusion Fittings are rated: • PN 16 (Water) • GAS PE100 SDR11
Lightfit are rated: • PN10 (Water) Note: for further details, see the notations on each fitting or consult your Plasson representative Fusion parameters Fusion time and cooling time are clearly marked on the barcode label of each and every fitting. In addition, they may be obtained using a barcode reader. Couplings of diameter ≤ 355mm and wastewater saddles have a red colored self-recognition terminal pin that communicates fusion time automatically to Plasson Controllers (the Smart-System solution) when the terminals are connected according to instructions. All Plasson's fittings may be welded successfully at ambient temperatures from -10 to 45°C. For more details please contact your Plasson representative. Standards Plasson ElectroFusion fittings are designed, tested and quality controlled according to Plasson’s internal standards. These standards are based on the following international standards:
ISO 8085 EN 1555 EN 12201 NF 136
AS/NZS 4129 WIS 4-32-14 WIS 4-32-15
38
Powered by FlippingBook