EF Installation Instructions Large Diameter Saddles
* Install only with Plasson dedicated clamping tool for large saddles .
1
2
Place the appropriate tighening plate accorrding to saddle type and size over saddle outlet.
Scrape and clean the pipe. Scrape twice if manual scraper is used. then locate the saddle on the pipe
3
4
Shift the ratchet to its “loose” position, and attach to the hooks. both pulling devices should be placed in the same direction.
Fit the jig ring on the spigot; place in the appropriate direction pending on the spigot diameter used (90mm, 110mm, 125mm or 160mm)
IMPORTANT NOTICE: The enclosed instructions should be regarded only as a reminder for qualified welders.
32
Powered by FlippingBook