Product welding barcode All Plasson ElectroFusion fittings are equipped with a welding barcode label.
Product Welding Barcode Data
Welding barcode
Batch number
Product name
Traceability barcode
Welding data
This welding label can be read by the barcode pen or barcode scanner attached to the welding control box. Scan the label from left edge to right or visa versa without stopping. Make sure that the weld and cool time appearing on the controller screen are identical to that appearing on the barcode. If data is identical you are now ready to start the weld process by pressing the START button on the controller. If problems are encountered trying to read the barcode check the following: - Make sure that the controller is ready to accept the welding data. If uncertain, press red "stop" botton to reset. - Make sure that the barcode pen is held at an angle to the label and that the reading starts from the white area on one side and ends on the opposite side of the label. - If a problem still exists check if the light on the tip of the pen is lit - if not, check cable connection to controller is properly connected. - Check that the pen tip is clean, dry and free of dirt.
Scan Barcode Data
21
Powered by FlippingBook